AJS Motorcycle Mudguards

Hand-Formed Steel Wings

AJS Motorcycle Mudguards - Hand-Formed Steel Wings

AJS Motorcycle Mudguards

Recreating Period Motorcycle Guards in Steel, Formed Over Timber Profiles

Coachbuilding skills don't stop at car bodywork. The techniques used to shape a wing for a pre-war special — timber profiles, hand-worked compound curves, a rolled edge for stiffness — are the same ones a motorcycle mudguard needs. These AJS guards came to us because no serviceable replacement existed and the originals were beyond saving in their current form.

The Original Guards

The guard that arrived with the project showed exactly that history — a scatter of redundant fixing holes, an elongated slot cut through the crown, and rectangular sections previously let in and welded around their perimeters. Some of that work was old, and some of it was crude. Surface corrosion had taken hold along the beaded edge. On a guard this visible, filling and dressing each defect individually would have left a panel that was more repair than original.

Timber Profiles and Forming

New guards were formed in steel over shaped plywood profiles cut to the correct section — a small-scale version of the same buck method used for a car body, giving a physical reference to work the metal against and check it for symmetry along its length. The curve of a motorcycle guard is deceptively demanding: it has to hold a consistent radius around the wheel while carrying a crowned section across its width, and any flat spot or twist reads immediately once the guard is fitted and the eye can follow its line.

Edges, Ribs and Fixings

The outer edge was rolled to form the raised bead that gives a guard its stiffness and its period appearance — without it, a mudguard both looks wrong and flexes in service. Internal reinforcement strips were fitted and secured with copper rivets, and mounting tabs were welded to the underside at the correct positions, taken from the machine rather than from the old part. Heat colouring along the seams was left visible at this stage; the guards were finished afterwards.

Small Work, Full Skills

A pair of mudguards is a modest job by the standards of a full body. It calls on precisely the same abilities: reading a compound curve, controlling a rolled edge, and building a part that fits a machine nobody holds drawings for. Where a component needs traditional hand-forming rather than a catalogue number, we’re glad to take it on — cars, motorcycles, or anything else built the old way.